m

Products

Oil & Gasline

Pipes & Fittings

A firebreak is a gap in vegetation or other combustible material that acts as a barrier to slow or stop the progress of a bushfire or wildfire. A firebreak may occur naturally where there is a lack of vegetation or "fuel", such as a river, lake or canyon. Firebreaks may also be man-made, and many of these also serve as roads, such as a logging road, four-wheel drive trail, secondary road, or a highway.

 

JUNT UL/FM GROOVED FITTINGS
   
 

JUNT is the professional producer of mechanical pipe joining solutions and grooved pipe joining systems. Used in the most demanding markets, JUNT pipe fitting technologies and services put people to work faster while increasing safety, ensuring reliability and maximizing efficiency. JUNT grooved couplings, grooved fittings and pipe connectors are at work in more than 30 countries across diverse business lines. Our pipe fitting solutions meet specific business needs such as accommodating thermal movement, providing seismic solutions, safer system installations, pipeline maintenance and installation, fire protection piping and noise and vibration attenuation.

Junt Grooved Fitting Type we sales and Distribute it as Rigid and flexible Coupling, elbow, tee, cross, reducer, cap, mechanical tee, mechanical cross, flange adaptor Standard : ANSI, ASTM, ISO Type: Manufacturer Size 1"-12", Material: Ductile iron QT450,Ductile Iron to ASTM A536 Finish, Paint, Epoxy. Approval: FM/UL/CE

 

 

Fire Gate Valve


     
 

Rapidrops

Sizes:- 65mm - 400mm (2½" - 16")
Working Temperature:--10°C to 160°C (14°F to 320°F)
Aprovals:- UL listed 65mm - 400mm (2½" - 16")
Model 103FF Outside Screw and Yoke (OS&Y) gate valve with resilient wedge, The stem is pre-grooved for installation of a supervisory switch. The interior & exterior have an electrostatically applied fusion - bonded epoxy coating of 0.2 - 0.5 mm as per AWWA C-550. Rapidrop 103FF OS&Y gate valve is used in a fire protection sprinkler system, the stem and stem nut are located outside of the body of the valve which makes it easy to see if the valve is open or closed. If the full length of the stem is visible then the valve is open, if the stem is not visible then the valve is closed. Rapidrop OSY2 supervisory switch is available to monitor the open or closed status of the 103FF OS&Y gate valve.

 

Muller Lede& China Others

3-12 INCH A-2361 RWGV FLXFL
Mueller® 350 psi Resilient Wedge A-2361 Gate Valves. Sizes 3"-12".
Catalog number: A-2361-6 flanged ends
SPECIFICATIONS:
Sizes – 3", 4", 6", 8", 10", 12"
Meets or exceeds all applicable requirements of ANSI/AWWA C515*** Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
Flanged end drilling complies with ASME/ANSI B16.1 Class 125
Iron body with nominal 10 mils Pro-Guard® Fusion Bonded Epoxy Coated interior and exterior surfaces
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut – open left or open right 
350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
UL Listed, FM Approved: 350 psig (2400 kPa/24 barg)
Designed for potable water applications

 
       
Non Return Valve
     
       
 

Rapidrop

 

Fig. CVF 300 Resilient Seat Check Valve is a rubber faced, flanged swing type check valve that allows water flow in one direction only. A hinged clapper remains open with water flowing in one direction, and automatically closes when flow stops preventing backflow. Removable cover allows easy access for inspection and maintenance. These valves are suitable for installation in both horizontal and vertical (with the flow upwards) pipelines.
Standards AWWA C508, Clear Waterway Connections EN1092-2 PN10/PN16 ANSI B16.1 Class125 Maximum Working Pressure 20.7 bar (300 PSI) Temperature -10°-120°C Coating Fusion Bonded Epoxy Coating In accordance with ANSI / AWWA C550

 

SPECIFICATIONS:
Sizes---2", 2-1/2", 3", 4",  6", 8", 10", 12"
Meets all applicable parts of ANSI/AWWA C508 Standard
Epoxy coated interior & exterior for corrosion resistance
Certified to ANSI/NSF 61
Flanged end dimensions and drilling comply with ANSI B16.1, class 125
Iron body, bronze mounted (IBBM)
Choice of bronze or rubber disc facing
For vertical or horizontal installation
O-ring sealed stuffing box
Adjustable weight to control opening and closing of clapper, lever can be installed on either side of valve
200 psig (1400 kPa/14 barg) maximum working pressure, 400 psig (2800 kPa/28 barg) test pressure

 


 
   
 
 
       

 


Other Products

fireline Products

Waterline Products

Other Products

 

 

Our Clients

  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
Get in Touch